|
|
| |
| |
>pDRIVE< MX multi-eco
Frequency inverter in a cubicle from 22 to 630
kW (3 AC 400 V / 50 Hz).
|
Basic design:
MX multi-eco 4V200 with protection degree IP23
|
The >pDRIVE< MX multi concept
offers cubicles ready for connection which can be optimally
adapted to the individual conditions of the plant due to
the superimposed unit assembly system.
With the >pDRIVE< MX multi
you obtain:
- three different protection degrees for
selection
- a clear specified and tested cooling
system
- a cubicle unit ready for connection
Basic equipment of the >pDRIVE<
MX multi-eco
The standard version of the switchgear labelled
>pDRIVE< MX multi-eco is equipped with
a main switch, mains fuse, AC or DC choke, and motor terminals
in IP23 and IP54 degree of protection. Further installed
components, such as the line contactor, motor filter, various
control options, alternatively with a field bus, safety
relay, cubicle heating, and much more, can be selected from
the pertinent list of options.
In addition, special designs in regard to changed cubicle
colour, cubicle cooling via an air conditioner or an air/water
heat exchanger, and customer-specific controls are available.
|
Device features
|
|
Cubicle system
|
The Rittal TS8 cubicle system with
additional internal reinforcement elements and slide
bars for easy installation and removal of the inverter
devices and other power components can be added to
any existing cubicle systems.
|
|
Operation / parameterization
|
For safe control, clear parameterization
and fast diagnosis, the matrix operating panel is
installed in the cubicle door at an ideal height.
A transparent protective cover and an adjustable locking
code prevent the unintended parameter adjustments.
|
|
Displays on the cubicle
|
The following status displays are
permanently present:
"Ready" / "Run" / "Trip".
3 analog actual values can be parameterized for the
display of current, voltage, power, load, speed, operating
hours meter, and much more and thus provide information
on the relevant drive data at any time.
|
|
Connection
|
Generous space is provided to connect
the power cables. The extensibility and accessibility
of the control terminals is also taken into consideration.
In the standard design, the cables are to be connected
at the bottom of the inverter.
|
|
Extensibility
|
All cubicle units are equipped with
a large, swivelling control panel that permits subsequent
extensions.
|
|
|
General technical
data
|
| Mains voltage |
380 V -15% up to 415 V
+10% for TT, TN or IT mains |
| Maximum
current |
120 %
for 60 s per 10 minutes, 135 % for 2 seconds |
| General design |
Cubicle system Rittal TS8 in RAL 7035
Controls in the cubicle door with additional protective
cover,
Cable entry from below, cubicle depth of 600 mm
|
| IP23
design |
Air intake
through grid in cubicle door,
Air blow through mounted air guidance hood,
Cubicle height of 2155 mm |
| IP54 design |
Air intake through filter
mats in cubicle door,
Air blow through top mounted fan
Cubicle height of 2260 mm |
IP54 design
with separated air flow |
Air intake
through cubicle basement,
Air blow through mounted air guidance hood,
Cooling of the control part by means of filter fans
in the cubicle door,
Cubicle height of 2355 mm incl. 200 mm basement |
| Operating temperature |
0 … +40°C, up
to +50°C with derating possible |
| Interfaces |
Control
terminals directly on the inverter or alternatively
in the cubicle, control terminals can be extended, fieldbus
connection via Modbus, Profibus DP or CANopen |
| Standards |
CE, RFI filter installed
for 2nd "Industrial environment" C3 |
Standard equipment |
Frequency
inverter >pDRIVE< MX eco, main switch,
mains fuses, AC or DC choke, motor terminals, control
panel and matrix operating panel in the door.. |
| Options |
- Line contactor
- additional RFI filter
- AMF (output motor filter, partially with additional
field)
- terminal extensions
- fieldbus
- emergency stop button
- safe standstill (control category 3 according to
EN 954-1 for "Safe Standstill" (stop category
0 or 1))
- cubicle lighting, cubicle heating, and much more..
|
| PC-Software |
Programming
software MatriX 3 |
| Documentation |
All
documentation and software will be found at our download
website under www.shop.pdrive.com! |
|
>pDRIVE<
|
Motor
power
|
Output
current
|
Dimensions
in mm *)
|
|
Width
|
Depth
|
| MX
multi-eco 4V22-S |
22 kW
|
48 A
|
600
|
600
|
| MX
multi-eco
4V30-S |
30 kW
|
66 A
|
600
|
600
|
| MX
multi-eco
4V37-S |
37 kW
|
79 A
|
600
|
600
|
| MX
multi-eco
4V45-S |
45 kW
|
94 A
|
600
|
600
|
| MX
multi-eco
4V55-S |
55 kW
|
116 A
|
600
|
600
|
| MX
multi-eco
4V75-S |
75 kW
|
160 A
|
600
|
600
|
| MX
multi-eco
4V90-S |
90 kW
|
179 A
|
600
|
600
|
| MX
multi-eco
4V110-S |
110 kW
|
215 A
|
600
|
600
|
| MX
multi-eco
4V132-S |
132 kW
|
259 A
|
600
|
600
|
| MX
multi-eco
4V160-S |
160 kW
|
314 A
|
600
|
600
|
| MX
multi-eco
4V200-S |
200 kW
|
387 A
|
600
|
600
|
| MX
multi-eco
4V250-S |
250 kW
|
481 A
|
800
|
600
|
| MX
multi-eco
4V315-S |
315 kW
|
616 A
|
800
|
600
|
| MX
multi-eco
4V355-S |
355 kW
|
671 A
|
1000 (1400)
|
600
|
| MX
multi-eco
4V400-S |
400 kW
|
759 A
|
1000 (1400)
|
600
|
| MX
multi-eco
4V500-S |
500 kW
|
941 A
|
1000 (1400)
|
600
|
| MX
multi-eco
4V630-S |
630 kW
|
1188 A
|
1200 (1600)
|
600
|
Values in brackets for IP54 with separated
air flow
*) Cubicle height:
- IP23 with air guidance hood 2155 mm
- IP54 with filter mats and additional fan 2260 mm
- IP54 with separated air flow 2355 mm
|
|
| |
©
2007 by Schneider Electric Power Drives GmbH
|
|
